The HCS housing is a quality Stainless Steel housing. It is extremely easy to install and uninstall, making it portable. It is therefore the ideal solution for people who move house on a regular basis. It fits most common threaded kitchen taps via a diverter valve. The HCS is supplied with Ultracarb ceramic filter candle.
A selection of cartridges are available to suit your needs, ensuring that your family has peace of mind in the water they drink.
Germ Africa manufacture a conventional string/yarn wound filter cartridge in Johannesburg. Our facility has been manufacturing yarn wound filter cartridges for over 10 years.
The string wound filter cartridges include the following configurations
All cartridges come in 10″ 20″ 30″ 40″ lengths with various µ (micron) ratings.
We pride ourselves on the quality of these liquid filter cartridges and continue to offer clients quality and consistency of product output.
The single shell design has been a standard in the industry for over 30 years. The FOC range is available in a cast iron head with a carbon steel body. The Maximum operating pressure on the units is 250psig (17 bar) @ 275°F
The FOC series is available in a wide range of connection sizes to fit your application as well as a wide variety of gasket options that make this housing compatible with almost any fluid. The standard gasket material is Buna-N.
| Model | Material | Cartridge Length | Pipe Size FNPT | Options | Gasket |
| FO |
C Cast iron Head with Carbon Steel sump |
78= 9 ¾ 80 20” |
6=3/4” 8=1” | NPT |
Blank = Buna E = EPR S = Silicone V = Viton |
Flowrite FOC Housing is compatible with a wide range of applications including | Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical |Pulp & Paper | Coolants | Desalination
Flowrite Polypropylene on Stainless Steel String Wound Filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended changeout differential pressure | 180 kPa |
Maximum flow rate – See performance table
| Micron Rating | flow l/min |
|---|---|
| 1 | 5 |
| 5 | 16 |
| 10 | 20 |
| 20 | 24 |
| 50 | 24 |
| 100 | 24 |
Flowrite string wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
FLOWRITE Polyprylene yarn wound filter cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended change-out differential pressure | 180 kPa |
Flowrite Wound Filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
Features
Benefits
Performance
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
Applications
Flowrite wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
Flowrite Wound filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended changeout differential pressure | 180 kPa |
Maximum flow rate – See performance table
| Micron Rating | flow l/min |
|---|---|
| 1 | 5 |
| 5 | 16 |
| 10 | 20 |
| 20 | 24 |
| 50 | 24 |
| 100 | 24 |
Flowrite wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
At Germ Africa we sell Domestic water filters in addition to our wide range of industrial water filters. Our primary product offering for house and home is from the Doulton range of filter cartridges.
The range of housing and Ceramic filters from Doulton caters for all your concerns for your families needs.
We also provide our own range of filter cartridges under the banner Flowrite.
In 19th Century England, the River Thames was London s main water supply and sewer. Henry Doulton discovered that filtering water through a porous ceramic could stop people becoming sick from cholera and other water-borne diseases. This was a revolution in water treatment.
Fast forward 175 years and the ceramic filtration technology has advanced a long way, but the principles of our ceramic filters remain the same – providing safe, healthy, great-tasting drinking water wherever and whenever you need it. From a mud hut in Uganda to an office block in Utah, Doulton filters are working round-the-clock to provide millions of people with water they can enjoy and trust.
Doulton® filters offer you bottled water quality on tap 24 hours a day. Our unique ceramic filtration technology produces drinking water of unrivalled quality. All of our filter grades have been microbiologically tested. Most grades also remove chlorine and improve the taste and odour of the water, while others use lead absorbtive media to take out toxic lead specifically and other heavy metals.
Our Flowrite range of filters offer affordable filtration at a level of quality again to ensure your continued peace of mind.
We continually add to our range of filtration related products and also keep a standard stock of your common components like filter cartridges, filter housings and activated carbon filter cartridges.
If it is a simple tap plugin then we can offer counter top units to suit. Or perhaps an under counter unit suits your needs. We have many different designs and styles.
Are you looking for taste and possible odour removal from your home then look for the Activated Carbon water filter cartridge equivalent designed for such use.
We do all this in the hope to ensure your drinking water in your home is as it should be.
Patented extrusion process produces an activated carbon block filter with superior ability to adsorb chlorine, taste, odour, organics, and colour components for taste filtration.
*Performance Tested and Verified by Independent Laboratory Testing.
For housing to be used with this filter our FH range of filter cartridge housing will provide you an all in one provider for your solution.
| End caps: | Polypropylene |
| End Caps Adhesive: | Low Density Polyethylen |
| End Configuration: | Double Open End |
| Gaskets: | Santoprene |
| Binder: | Polyethylene |
| Outer Wrap: | Melt Blown Poly-prop |
| Netting: | Polypropylene |
| Operating Parameters | |
| Maximum Operating Temperature | 125 F (52 C) |
| Maximum Differential Pressure | 100 psid (6.9 bar) |
| Maximum Operating Pressure | 250 psig (17.2 bar) |
| Collapse Pressure | 200 psid (13.8 bar) |
| Steam/Autoclave | Do not steam or autoclave COT+9″75 filters |
| Flush – Filters should be flushed for a minimum of 5 minutes prior to use |
Drinking Water • Cyst Reduction • Chlorine Removal • Bottled Water • Color removal • Soft Drinks • Flavor removal
NSF – The Carbtec filter is Tested and Certified by NSF International against NSF/ANSI standard 42 for material requirements only
Resin Bonded filter cartridges are manufactured in South Africa to the highest international standards. They are produced using Polyester fibres of controlled diameter which are bonded together by a proprietary process using a phenolic resin.
The process used ensures that the filtration pores between the fibres are more open near the outer surface of the cartridge, and become progressively smaller towards the core of the cartridge. This graded density construction enables the cartridge to trap coarser particles near it’s outer surface, while finer particles are trapped nearer the core.
This provides the exceptionally good particle removal efficiency which is the outstanding feature of the “RRB” cartridge. In addition, the rigid construction also ensures that the cartridge will not deform under high operating pressure differentials.
This means that the Resin Bonded filter cartridges exhibit a consistent and unvarying micron rating throughout it’s life, and does not suffer from the deteriorating filtration efficiency and dirt unloading which occurs on cartridges of softer construction.
The use of grooves greatly increases the cartridge surface area, thereby extending even further, the Resin Bonded filter cartridges already superior service life.
|
Micron Ratings manufactured |
|
|
01
|
50
75
|
|
10
|
|
|
25
|
100
|
Density Construction
Cross section of “RRB” cartridge showing the Graded Density Construction
