Pleated Polyethersulfone (PES) Membrane for Bioburden Reduction in Beverages and Biopharmaceuticals
ZTEC-B Bioburden Reduction grade membrane cartridges provide consistent performance for bioburden reduction and particle removal across a wide range of beverage, pharmaceutical and biological fluids. The naturally hydrophilic PES membrane filters provide exceptional flow rates, long on-stream life, broad chemical compatibility and have no added surfactants to contribute to extractables. The cartridges are integrity testable and steamable to assure reliable service in critical applications.
Filter Features– Benefits
Manufactured in an ISO Class 7 Cleanroom Environment
100% flushed with 18MΩ water and integrity tested
Meets USP Class VI Biological Test for Plastics
All materials are FDA listed for food and beverage contact
High retention (LVR>7) of yeast and other spoilage organisms
Pore size, lot and serial number are stamped on each filter element for identification and traceability
• Bottled Water • Opthalmic Solutions • Culture Media • Reagent Chemicals • LVPs • Buffers • Juices
Asymmetric Polyethersulfone membrane
|Inner core, end caps, cage:||
|Gaskets/O-Rings options:||Buna-N, EPDM, Silicone, Viton, Teflon Encapsulated Viton (O-Rings only)|
0.2 μm, 0.45 μm, 0.65 μm
|Dimensions and Operating Parameters|
P (DOE), P2 (226/flat), P3 (222/flat), M1 (3/4’’ male NPT), M2 (1’’ male NPT)
9.76" 10" 20" 30" 40"
7.5 ft2. (0.7 m2) per 10 inch element
|Maximum operating temperature:||
80 psid @ 70°F (5.5 bar @ 21°C)
40 psid @ 176°F (2.8 bar @ 80°C)
Hot DI Water
Filter cartridge will withstand temperatures of 185°F (985°C) for up to 30 consecutive minutes.
Compatible with most common chemical cleaning, sanitizing and sterilizing agents and with pH range from 1–14. Consult factory for specific compatibility information.
Cartridges may be steamed or autoclaved for at least 50 thirty minute cycles @ 275°F (135°C).
Typical Bacterial Retention Performance
|0.2μm:||LRV for B diminuta ≥8|
|0.45μm:||LRV for S. marcescens ≥ 11 LRV for L. brevis ≥ 10|
|0.65μm:||LRV for S. cerevisiae ≥ 10 LRV for L. brevis ≥7|
Integrity Test Specifications
Minimum Bubble Point values and maximum Diffusive Air Flow (per 10-inch cartridge) values for ZTEC-B filters wet with water:
|Pore Size||Bubble Point||Diffusive Air Flow|
|0.2 μm:||≥ 38psig (2.6 bar)||≤ 35cc/min @ 30psig (2.1 bar)|
|0.45 μm:||≥ 25psig (1.7 bar)||≤ 35cc/min @ 20psig (1.4 bar)|
|0.65 μm:||≥ 18psig (1.2 bar)||≤ 35cc/min @ 15psig (1.0 bar)|
FDA Listed Materials
All materials comply with FDA title 21 of the Code ofFederal Regulations Sections 174.5, as applicable for foodand beverage contact.