Bryto No 5 is an aqueous synthetic general purpose grinding fluid.
Bryto No 5 is a purpose formulated fully synthetic grinding fluid based on conventional nitrite/amine technology. The product containsno oils or soaps and it is readily soluble in water to give a pale green translucent stable solution.
The product is recommended for all surfacegrinding, cylindrical (internal and external) grinding, tool, and cutter grinding.The product is particularly recommended for use in centreless operations.
Bryto No 5 is primarily for use in grinding ferrous components, it may be used on copper but may cause staining, it is not suitable for aluminium.
Features and Benefits
Contains no oil
Does not create wheel glazing, thereby extending wheel life, reducing downtime and because the true and consistent reproduction of the wheel grit is maintained ,high throughput.
Effective at high dilutions.
The product functions at high dilutions leading to excellent cooling, improved visibility of the workpiece and rapid settling of grinding debris.
Excellent Corrosion Inhibition
Bryto No 5 shows excellent corrosion control, rusting is controlled even at high dilutions, the product does not leave a sticky residue on drying.
Packing, Storage and Handling
Bryto No 5 containers should be stored inside out of direct sunlight, protect from freezing. The product is available in 5, 20 and 210 litre drums.
The above are typical values and do not constitute a specification. Data in this bulletin is given in good faith and as a general guide without liability for specific performance.
Bryto No 5 mixes easily with water, thedilutions below are given as a guideline:-
Bryto no 5 operates best at room temperature excessive temperatures of > 65 º C should be avoided.