FILTRATION | FILTERS | FILTER HOUSING | LIQUID PROCESS FILTERS | AIR AND GAS FILTERS | CROSSFLOW MEMBRANES

NEWS | OFFERINGS | PRODUCTS

High Flow Series Filter Cartridges

Large Geometry Pleated Filters for High Flow

Graver High Flow Series filters feature a larger geometry to handle higher flows with fewer filter elements. The result is much faster, easier filter changeouts. In addition, the inside to outside flow allows for excellent dirt holding capacity, extending the time between filter changeouts.

Filter housings are also available and because of the filters high flow and dirt holding capacity, smaller systems are possible, reducing upfront capital costs.

High Flow Series Features – Benefits

  • 6” diameter, large geometry for high flows
  • Absolute retention ratings from 1 to 100 microns
  • Capable of flow rates up to 500 GPM in a single 60” element
  • FDA listed materials of construction
  • Inside-out flow retains contaminant even during change-out
  • Multi layer pleated construction with optimized surface area
  • Outer cage prevents media extrusion problem experienced with some competitive offerings
  • Unique Quad Seal gasket provides maximum seal integrity
  • Retrofits competitive high flow filter housings
  • Thermally bonded construction

Filter Specifications

Media:Polypropylene
Inner core:Polypropylene
Gaskets/O-Rings options:

EPDM, Silicone, Buna N, Viton

Micron ratings:

1, 3, 5, 10, 20, 40, 60, 100 μm

*Other micron rated media available upon request
Dimensions and Operating Parameters
Nominal lengths:

50.8, 101.6, 152.4 cm

Outside diameter:

6.0 in (15.2 cm)

Maximum operating temperature:80°C
Differential pressure:

180°[email protected] 20psid (82°C @1.4 bar)

160°[email protected] 30psid (71°C @2.1 bar)

77°F @ 50psid (25°C @ 3.4 bar)

Recommended changeout  pressure for disposal: 35 psid (2.4 bar)

Maximum flow rates:

60” element up to 500 GPM (1892 lpm)

40” element up to 350 GPM (1325 lpm)

20” element up to 175 GPM (662 lpm)

Filter Removal Efficiency

Beta Ratio EfficiencyBeta 1000 99.9%Beta 100 99%Beta 10 90%
1 micron10.60.2
3 micron321.5
5 micron543
10 microns108.56.5
20 microns221914
40 microns381815
60 microns603520
100 Micron1007545
Beta Ratio =
Upstream particle counts
Downstream particle counts
previous arrow
next arrow
PlayPause
Slider

Germ Africa

The company traces its roots back to Germ Oils of the UK, and commenced business in South Africa in 1905. The company was incorporated in South Africa as a public company in 1938, with the parent company, Germ Oils of the UK, as its major shareholder. In the late 1960’s the company in South Africa was sold to the local management following a take-over of the parent company in the UK.

Today, Germ Africa (Pty) Ltd manufactures and trades in sectors mainly incorporating

  • Filtration
  • Metering/Dosing Pumps
  • Ion Exchange Resins
  • Industrial Lubricants

DOSING PUMPS | PROBES | CONTROLLERS |

ADDITIVES

OUR LUBRICATION RANGE HAS ITS OWN WEBSITE PLEASE VISIT WWW.GERMLUBRICANTS.CO.ZA FOR MORE INFORMATION ON OUR PRODUCTS AND SERVICES

ION EXCHANGE RESINS | CONDENSATE POLISHING | WATER TREATMENT

Germ Africa News