Primsa dosing pump

DOSING PUMPS

Prius D

EMEC’s  PRIUS D series is a motor-driven metering pump that has been entirely projected and engineered to meet higher dosing needs.

The PRIUS D is manufactured with a PTFE diaphragm, aluminium enclosure, spring return mechanism, manual degassing valve (PVDF and PP pump heads), flow regulation, double ball check valve and liquid ends. These pumps available in different sizes and materials such as PVDFStainless Steel or PP pump heads available.

The PRIUS D HP for HIGH PRESSURE is manufactured with a PTFE diaphragmSS pump head, aluminium enclosure, spring return mechanism, flow regulation and double ball check valve.

ERMS COMMUNICATION

ERMES is an advanced remote management system that will become your most reliable assistant for remotely monitoring all of your systems. Monitoring can be done anywhere with the ease and quickness of a web app.

ERMES is able to oversee and manage parameters of all EMEC enabled operating systems, monitoring probes, instrument inputs, product levels, temperature and set-points.

You will be able to read, analyse and modify the instruments parameters immediately from your PC, smartphone or tablet, through a whatever browser you chose.

MTOWER CONTROLLER

The MTOWER controller is a fully featured cooling tower controller with two way biocide options – inhibitor and bleed control.

The MTOWER is available in 1 channel, 2 channel or 3 channel models. The controller is easy to control by means of an ENCODER wheel and an easy-nav rotation. ERMS web communication which allows remote access and permanent data storage with system log.

  • Parameters: conductivity, chlorine, pH, ORP and temperature
  • Up to 3 Channels
  • Pre-bleed
  • Real-time graphs
  • Permanent data storage with system log
  • USB Download
  • Current output 0/4 – 20mA
  • MODBUS protocol

The MTOWER controller is manufactured in ABS housing to ensure protection against aggressive chemicals and tough environmental factors.

Prius D

EMEC’s  PRIUS D series is a motor-driven metering pump that has been entirely projected and engineered to meet higher dosing needs.

The PRIUS D is manufactured with a PTFE diaphragm, aluminium enclosure, spring return mechanism, manual degassing valve (PVDF and PP pump heads), flow regulation, double ball check valve and liquid ends. These pumps available in different sizes and materials such as PVDFStainless Steel or PP pump heads available.

The PRIUS D HP for HIGH PRESSURE is manufactured with a PTFE diaphragmSS pump head, aluminium enclosure, spring return mechanism, flow regulation and double ball check valve.

ERMS COMMUNICATION

ERMES is an advanced remote management system that will become your most reliable assistant for remotely monitoring all of your systems. Monitoring can be done anywhere with the ease and quickness of a web app.

ERMES is able to oversee and manage parameters of all EMEC enabled operating systems, monitoring probes, instrument inputs, product levels, temperature and set-points.

You will be able to read, analyse and modify the instruments parameters immediately from your PC, smartphone or tablet, through a whatever browser you chose.

MTOWER CONTROLLER

The MTOWER controller is a fully featured cooling tower controller with two way biocide options – inhibitor and bleed control.

The MTOWER is available in 1 channel, 2 channel or 3 channel models. The controller is easy to control by means of an ENCODER wheel and an easy-nav rotation. ERMS web communication which allows remote access and permanent data storage with system log.

  • Parameters: conductivity, chlorine, pH, ORP and temperature
  • Up to 3 Channels
  • Pre-bleed
  • Real-time graphs
  • Permanent data storage with system log
  • USB Download
  • Current output 0/4 – 20mA
  • MODBUS protocol

The MTOWER controller is manufactured in ABS housing to ensure protection against aggressive chemicals and tough environmental factors.

COOLING TOWERS

Customised all in one panel solution from EMEC offers an efficient measuring system that allows for accurate conductivity control.

These systems can be remotely monitored and controlled by means of the ERMES software that EMEC offer.

LOTUS – CHLORINE DIOXIDE GENERATOR

WITH PROBE FOR MEASUREMENT

LOTUS MINI is all-round solution for all your need of CHLORINE DIOXIDE GENERATOR water disinfection. LOTUS MINI with probe measure system produces, doses and controls chlorine dioxide for water disinfection. It is equipped with ClO2 probe (SCL2 or SCL17) or an mV probe (ERH), a probe holder and a filter.

Chlorine dioxide is produced from diluted base chemicals: acid-chlorite process by hydrochloric acid (HCl 9%) and sodium chlorite (NaClO2  7,5%).
Chlorine dioxide produced by LOTUS MINI is set to be proportional to the circulating water flow or based on a set-point – it is then dosed into the water flow. There is no storage of chlorine dioxide hence no chlorine dioxide gas or concentrated solutions exist outside of the process application.

LOTUS MINI chlorine-dioxide-gererator with probe measure is designed to produce chlorine dioxide in a reaction chamber. Multi-function valves on the injection points ensure the security of the reaction chamber.

The base chemicals are stored in tanks and fed into the reaction chamber through suction lances. Integrated level switches automatically stop the pumps when the tanks are empty.

GAS SENSOR OPTION
This model of LOTUS MINI is equipped with gas sensor detection.

FEATURES

  •  PERMANENT DATA STORAGE (WITHOUT BATTERY) with system log on display
  •  Stand-by input
  •  3 flow sensors (mod. SEFL) input
  •  Real time production data
  •  Multifunction valve (MFKT/V)
  •  IP65 protection (NEMA4x) of LOTUS control instrument
  •  Working temperature: 0-45°C (32-110°F)
  •  PVC reaction chamber
  •  Instantaneous ClO2 production
  •  ClO2 dosing in PROPORTIONAL mode
  •  Pumps and SEFL flow sensors monitoring
  •  Service due data
  •  Water meter input
  •  Flow control input (flow alarm)
  •  Tank level controls (level alarms)
  •  LOTUS control instrument
  •  Pump for diluition water (grey)
  •  mA output
  •  ClO2 probe reading (LOTUS MINI SCL2 – LOTUS MINI SCL17)
  •  Temperature probe reading (probe and accessories not included)
  •  mV probe reading (LOTUS MINI ERH)
  •  ASA (Acrylonitrile Styrene Acrylate) enclosure

MODELS

LOTUS MINI 8 WITH PROBE MEASURE

HOUR CAPACITY

8 g/h

PRESSURE

8 bar

CHEMICAL CONSUMPTION

HCl 0.2 l/h

NaClO2 0.2 l/h

CONCENTRATION

2 g/l

LOTUS MINI 20 WITH PROBE MEASURE

HOUR CAPACITY

20 g/h

PRESSURE

8 bar

CHEMICAL CONSUMPTION

HCl 0.5 l/h

NaClO2 0.5 l/h

CONCENTRATION

2 g/l

COMMUNICATION

  •  ERMES
  •  MODBUS

CONFIGURATION

BASIC

  •  RS485 output to link other EMEC instruments

WIFI

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email

ADVANCED USB

  •  RS485 output to link other EMEC instruments
  •  Data Log on USB device

ETHERNET

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email

2G – 3G

  •  RS485 output to link other EMEC instruments
  •  Web ERMES remote control (PC, smartphone or tablet)
  •  Alarm messages via email
  •  Alarm messages via SMS

MODBUS

  •  Connection to other PLC instruments via RS485 or TCP/IP for reading and modifying parameters

CENTURIO TOWER

CENTURIO TOWER is the control instrument in cooling tower water
treatment, with the ease and safety of operation you need and with the stylish box designed by Giugiaro Design.

CENTURIO is equipped with a Linux operating system, a high performance
ARM A5 microprocessor, a large, touchscreen, colour display, in order to give you total and simultaneous control.

  • Parameters: conductivity, chlorine, pH, ORP, tracers, inductive conductivity, mA Input.
  • 5 channels to combine
  • Real-time graphs
  • Permanent data storage with system log
  • USB Download
  • Data import/export (backup & restore) via USB port to other CENTURIO.
  • Internet connection (WIFI, 3G or LAN), configuration and control by ERMES web app using PC, smartphone or tablet with any browser.
  • MODBUS serial communication to be connected to other devices on RS485 networks and TCP/IP MODBUS.

The “CENTURIO Tower” is a fully featured cooling towers controller with two-way biocide options and inhibitor / bleed control with 5 channels.

Cooling towers are heat removal devices used to transfer process waste heat to the atmosphere. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or rely solely on air to cool the working fluid to near the dry-bulb air temperature.

Common applications include cooling the circulating water used in oil refineries, chemical plants, power plants and building cooling.
All information is provided through a large COLOUR LCD display (480×272). “CENTURIO Tower” is housed in an IP65 plastic box.

PRISMA Dosing Pump

PRISMA dosing pumps: the incomparable accuracy of the stepper motor – EMEC.

EMEC is proud to introduce the new stepper motor-driven dosing pump PRISMA, the best solution for offering high-accuracy metering and extreme reliability.

Thanks to the new stepper motor and to the MultiFunction software, PRISMA dosing pumps offer complete control over dosing speeds and working modes as well as great flexibility and repeatability, meeting even particularly complex application needs.

PRISMA is also equipped with Level control, Alarms and Stand-by, while available working modes include Constant, Constant with external input, ppm, %, mlq, Pause-work, Weekly, mA, Pulse, Volt, external Batch and manual Batch.

PRISMA dosing pumps feature the Encoder control knob for quickly browsing through the configuration menus. And a large display to easily control and regulate the working parameters. By changing background colors PRISMA backlight display is capable of signaling different working status: pump running (green); stand-by (white); warning condition (yellow); alarm condition (red).

[YouTube_WD id=”4″]

TURNDOWN

PRISMA stepper motor-driven pumps give you the most accurate control over the stroke speed, providing an outstanding turndown ratio of up to 4800:1.

It means PRISMA, through its digital multifunction control, can split up the dosing process into a maximum of 4800 steps in order to offer the most homogeneous and precise distribution of the product to dose according to the required application.

SLOW MODE

The extreme versatility of PRISMA dosing pumps is also due to Slow Mode function. With Slow Mode enabled you can reduce the suction speed to 75, 50 or 25% of the normal speed, making easier, more reliable and extremely accurate the priming and the dosing, even when you have to handle particularly viscous liquids.

CAPACITY RANGE

PRISMA stepper motor-driven pumps are available with dosing capacity of 5, 13, 28 and 80 l/h at a working pressure of 20, 10, 5 and 2 bar, respectively.

TYPE D – Diaphragm Dosing Pump

D- Type Dipahragm Dosing Pump

D” type mechanical diaphragm metering pumps are suitable for use when the liquid to dose contains small suspended solids and when high pressure is not required.

The gearbox is a standard wormwheel reduction system coupled with a vertical mounted B14 shaped electric motor in accordance with UNEL-MEC specification. The mechanism for variation of the stroke length is a positive stroke spring return operated by an eccentric.

Stroke adjustment can be done manually, electrically (4-20mA; Profibus) and pneumatically. Different multiple head units are available on request. All the series can be ATEX certified.

Diaphragm pumps are suitable for use when:

  • The liquid dosed contains small amounts of suspended solids
  • The liquid dosed is abrasive
  • High pressure is not required
  • Flow rates – min 4l/h; max 1400l/h
  • Pressure ranges from 3 to 10 bar
  • Available in 220V, 380V & 525V – IP55
  • Standard wet-end executions in PVC and 316 stainless steel.
  • Diaphragm in PTFE
  • Multi-headed pumps also available on request.

Stroke adjustment  can be carried out:

  • Manual: by means of a linear micrometre screw from 0-100%
  • Electrical: by means of a motor servo controller with a 4-20mA signal
  • Pneumatic: by means of a pneumatic servo controller.

EMEC – SPARES AND ACCESSORIES

At Germ Africa we Stock a range of spares available making repair and maintenance easy.

These include :

  • injection valves
  • foot valves
  • suction and delivery valves
  • pump head, solenoids
  • diaphragms etc.

Accessories include:

  • Flow sensors
  • Multi function valves
  • Proximity switches
  • Pulsation Dampeners
  • Level probes
  • Probe holders