TAC OIL AMW – Tackiness Agents

Characteristics

Tac-Oil AMW is a highly effective concentrate of polyisobutylene dissolved in white oil, which was developed to suppress the oil mist formation of cutting oils. This ability was proven in laboratory tests and practice. Besides this Tac-Oil AMW is used as tackifier in lubricants where too strong tackiness is not desired.

Application

The recommended concentration in mineral oil is between 0.5 – 2.0 wt.%, depending on the required performance. Tac-Oil AMW is preferably blended at 60°C – 80°C in slow motion (low shearing) blending device. The temperature stability of Tac-Oil AMW is about 150°C for limited time.

Storage

Tac-Oil AMW may be stored indoors in the sealed original package for a minimum of 12 months.

	typ. value	Specification min.	max.
Density 15°C (g/ml)	0.870	0.860	0.890	DIN 51 757
Flash point PMCC (°C)	175	170		DIN EN ISO 2719
Viscosity 70°C (mPa·s)		1300	1700	DIN 53 015

The data contained herein serve as general information for our customers only and are not binding. The data contained herein have been collected to the best of our knowledge and do not constitute any advice or warranty to our customers for any specific application. It is up to our customer at their own risk to determine the suitability of each product for their individual purposes. The products are sold without any representation, warranty or guarantee either expressed or implied. Our liability is limited to the value of the supplied merchandise.