Melt Blown Filter Series

An economical, disposable, filter element that can be used for a wide range of applications. The depth filter is constructed of 100% polypropylene media for chemical compatibility with a wide variety of process fluids.

Filter Features–Benefits

  • FDA listed polypropylene media
  • Economical depth filtration
  • High dirt holding capacityGradient density fixed pore construction eliminates dirt unloading as differential pressure increases
  • Thermal bonded endcaps optional
  • MBF filters are free of binders, adhesives and surfactants

Applications

Food & beverage • Aqueous solutions • Chemicals • Blowdown post filter • Wastewater • Rad waste • Magnetic tape coatings • RO Prefilters • Ink

Contact us on 011 435 0348 or email as at [email protected] should you require a brochure or any further information on this product.

 

Filter Specifications

Media: Polypropylene

End caps: Polypropylene

Gaskets/O-Rings: Silicone, Viton, EPDM, Buna-N

Micron ratings: 1, 3, 5, 10, 20, 25, 30, 50, 75μm

Dimensions

Typical nominal lengths: 9.75″, 10’’, 20’’, 30’’, 40’’ (24.8, 25.1, 50.8, 76.2, 101.6 cm)

Other lengths available

Outside diameter: 2.5’’ (6.35 cm)

Inside diameter: 1.0’’ (2.54 cm)

Maximum differential pressure:  50 psid @ 70 °F (3.45 bar @ 21°C)25 psid @ 140 °F (1.72 bar @ 60°C)

Recommended changeout pressure for disposal: 35 psid (2.4 bar)

Melt Blown Filters

 

Graver Melt blown Filter cartridge