FOC – Single Filter cartridge Housing
Single Cartridge Housing for Liquids
The single shell design has been a standard in the industry for over 30 years. The FOC range is available in a cast iron head with a carbon steel body. The Maximum operating pressure on the units is 250psig (17 bar) @ 275°F
The FOC series is available in a wide range of connection sizes to fit your application as well as a wide variety of gasket options that make this housing compatible with almost any fluid. The standard gasket material is Buna-N.
Features
- Designed for industrial and commercial filtration needs
- Heavy duty construction for durability
- Offered in a wide variety of materials
- Simple bolt-n-nut design for quick cartridge change outs
- In line fittings for easy installation
- Knife edge seal at both cartridge ends to eliminate by-pass
- Housings accept double-open-end cartridges
Standard Design Specifications
| Model | Material | Cartridge Length | Pipe Size FNPT | Options | Gasket |
| FO |
C Cast iron Head with Carbon Steel sump |
78= 9 ¾ 80 20” |
6=3/4” 8=1” | NPT |
Blank = Buna E = EPR S = Silicone V = Viton |
Applications
Flowrite FOC Housing is compatible with a wide range of applications including | Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical |Pulp & Paper | Coolants | Desalination
Filter Bags – Extended life (POEX/PEEX)
The Extended Life filter bags (POEX and PEEX) provide outstanding performance on many types of contaminants such as gels, particles with wide ranges of sizes, and particles with various irregular shapes.
The coarse, pre-filtering layer is designed to provide long service life, capturing a large amount of contaminants without excess surface loading.
The POEX has been field-proven to hold up to twice the amount of contaminants as a standard felt filter bag, reducing waste volume and bag changes. The Extended Life filter bag is ideal for automotive coatings, chemicals, resins, edible oils and other fluid applications.
- Excellent filtration on many contaminants – gels, particles with wide range of sizes and particles with irregular shapes
- A coarse inner layer, graded pore structure, greater depth than standard filter bags provide excellent filtration performance
- Available in polyester (PEEX) and polypropylene (POEX)
- Twice the standard dirt-holding capacity of traditional felt filter bags to provide longer service life, fewer change-outs and reduced waste
- Polypropylene bags are FDA compliant
- Micron rating for polypropylene 5-100; polyester 1-100
- PolyWeld® seam construction with hermetically sealing Polyloc® ring eliminates liquid bypass
- Glazed finish eliminates unwanted fiber migration
Specifications
Filter bag Media
- Polyester extended life
- Polypropylene extended life
Maximum Operating Temperature
Polypropylene: 200-220° F (93-104° C)
Polyester: 275-325° F (135-162° C)
Micron Rating
PEEX= 1, 5, 10, 25, 50, 100
POEX= 5, 10, 25, 50, 100
Cover
Plain
Sizes
1: 7” x 16” (17.78 cm x 40.65 cm) 2: 7” x 32” (17.78 cm x 81.28 cm)
Ring
Polypropylene PolyLoc® Polyester PolyLoc® S = Steel Ring*
Other
Welded Seam Construction
* Available with sewn seams only
Cotton on Stainless Steel Wound Filter cartridge
Flowrite Wound Filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
Features
- Stainlesss Steel core and cotton yarn materials
- Four different cartridge lengths
- Six different micron ratings
- State-of-the-art winding machines
Benefits
- Wide chemical compatibility
- Fits most housings without joining
- Suitable rating for most applications
- Consistent reliable quality
Performance
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
Applications
Flowrite wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
Cotton on Tinned Steel String Wound Filter Cartridge
Flowrite Wound filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
Features
- Tinned Steel core and Cotton yarn materials
- Four different cartridge lengths
- Six different micron ratings
- State-of-the-art winding machines
Benefits
- Wide chemical compatibility
- Fits most housings without joining
- Suitable rating for most applications
- Consistent reliable quality
Performance
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
Operating Paramaters
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended changeout differential pressure | 180 kPa |
Maximum flow rate – See performance table
| Micron Rating | flow l/min |
|---|---|
| 1 | 5 |
| 5 | 16 |
| 10 | 20 |
| 20 | 24 |
| 50 | 24 |
| 100 | 24 |
Applications
Flowrite wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
Polypropylene Yarn Wound Filter cartridges
FLOWRITE Polyprylene yarn wound filter cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
Features
- Polypropylene core and yarn materials
- Four different cartridge lengths
- Six different micron ratings
- State-of-the-art winding machines
Benefits
- Wide chemical compatibility
- Fits most housings without joining
- Suitable rating for most applications
- Consistent reliable quality
Performance
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
Operating Paramaters
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended change-out differential pressure | 180 kPa |
Polypropylene on Stainless Steel String Wound Filter Cartridge
Flowrite Polypropylene on Stainless Steel String Wound Filter Cartridges are an improved, conventionally wound filter cartridge manufactured on state-of-the-art precision winding machines. Continuous length winding eliminates dead spots and bypass. The single strand, purpose-spun roving employs a strictly controlled material to produce a consistently high quality filter cartridge giving optimum flow and filtration performance.
Advanced manufacturing technology and strict in-house quality control, combined with a variety of wind patterns, ensures filtration that best fits the application to provide economical and consistent results time after time. For advice on specific applications contact Germ Africa
Features
- Stainless Steel core and Polypropylene yarn materials
- Four different cartridge lengths
- Six different micron ratings
- State-of-the-art winding machines
Benefits
- Wide chemical compatibility
- Fits most housings without joining
- Suitable rating for most applications
- Consistent reliable quality
Performance
The table below gives the water flow rate in l/min per single 10” cartridge, based on a pressure drop of 7 kPa. Higher flow rates will result in higher pressure drops, but in no case should the flow rate exceed 38 l/min/cartridge
Operating Paramaters
| Maximum operating temperature | 60°C |
|---|---|
| Maximum differential pressure | 350 kPa |
| Max. recommended changeout differential pressure | 180 kPa |
Maximum flow rate – See performance table
| Micron Rating | flow l/min |
|---|---|
| 1 | 5 |
| 5 | 16 |
| 10 | 20 |
| 20 | 24 |
| 50 | 24 |
| 100 | 24 |
Applications
Flowrite string wound filter cartridges are widely applicable on general purpose fluid filtration in many industries including:
Chemical | Ink & Paint | Food & Beverage | Petrochemical | Photographic | Plating | Electronics | Oil & Gas | Pharmaceutical
Domestic Water Filters
At Germ Africa we sell Domestic water filters in addition to our wide range of industrial water filters. Our primary product offering for house and home is from the Doulton range of filter cartridges.
The range of housing and Ceramic filters from Doulton caters for all your concerns for your families needs.
We also provide our own range of filter cartridges under the banner Flowrite.
Doulton
In 19th Century England, the River Thames was London s main water supply and sewer. Henry Doulton discovered that filtering water through a porous ceramic could stop people becoming sick from cholera and other water-borne diseases. This was a revolution in water treatment.
Fast forward 175 years and the ceramic filtration technology has advanced a long way, but the principles of our ceramic filters remain the same – providing safe, healthy, great-tasting drinking water wherever and whenever you need it. From a mud hut in Uganda to an office block in Utah, Doulton filters are working round-the-clock to provide millions of people with water they can enjoy and trust.
Doulton® filters offer you bottled water quality on tap 24 hours a day. Our unique ceramic filtration technology produces drinking water of unrivalled quality. All of our filter grades have been microbiologically tested. Most grades also remove chlorine and improve the taste and odour of the water, while others use lead absorbtive media to take out toxic lead specifically and other heavy metals.
Flowrite
Our Flowrite range of filters offer affordable filtration at a level of quality again to ensure your continued peace of mind.
We continually add to our range of filtration related products and also keep a standard stock of your common components like filter cartridges, filter housings and activated carbon filter cartridges.
If it is a simple tap plugin then we can offer counter top units to suit. Or perhaps an under counter unit suits your needs. We have many different designs and styles.
Are you looking for taste and possible odour removal from your home then look for the Activated Carbon water filter cartridge equivalent designed for such use.
We do all this in the hope to ensure your drinking water in your home is as it should be.
COAX™ Melt Blown filter cartridge
Two Stage Depth filter cartridge
The COAX Depth Filter cartridge is an integral two stage depth filter. The first stage of the filter cartridge is made of non-woven melt blown polypropylene to trap coarser articles.
The second stage inner core is composed of a bi-component polypropylene and polyethylene fibre to provide fine particle retention. This unique design provides a true graded density filter cartridge that offers a marked increase in useful life and dirt capacity.
In addition, the rigid nature means there is no flexing of the cartridge and greatly reducing media migration and particle unloading.
Filter Features–Benefits
-
Two stage graded density melt blown depth filter helps to Maximize dirt holding and useful life
-
Inert pure polyolefin construction, non-shedding media
-
Broad chemical compatibility
-
Low extractables
-
Meets USP Class VI standards – Acceptable for use in food, beverage and pharmaceutical applications
-
Extensive range of lengths and configurations
- FDA listed materials of construction
Applications
Paint • Perfumes • Cutting Oils • CMP Slurries • Magnetic Slurries • Corn Syrup • Plating Solutions • Pre R.O. • Coatings
Filter Specifications
Media: Polypropylene
End caps: Polypropylene
Gaskets/O-Rings: Silicone, Viton, EPDM, Buna-N
Micron ratings: 1, 3, 5, 10, 20, 25, 30, 50, 75μm
Dimensions
Typical nominal lengths: 9.75″, 10’’, 20’’, 30’’, 40’’ (24.8, 25.1, 50.8, 76.2, 101.6 cm)
Other lengths available
Outside diameter: 2.5’’ (6.35 cm)
Inside diameter: 1.0’’ (2.54 cm)
Maximum differential pressure: 50 psid @ 70 °F (3.45 bar @ 21°C)25 psid @ 140 °F (1.72 bar @ 60°C)
Recommended change-out pressure for disposal: 35 psid (2.4 bar)
High Flow Series Filter Cartridges
Large Geometry Pleated Filters for High Flow
Graver High Flow Series filters feature a larger geometry to handle higher flows with fewer filter elements. The result is much faster, easier filter changeouts. In addition, the inside to outside flow allows for excellent dirt holding capacity, extending the time between filter changeouts.
Filter housings are also available and because of the filters high flow and dirt holding capacity, smaller systems are possible, reducing upfront capital costs.
High Flow Series Features – Benefits
- 6” diameter, large geometry for high flows
- Absolute retention ratings from 1 to 100 microns
- Capable of flow rates up to 500 GPM in a single 60” element
- FDA listed materials of construction
- Inside-out flow retains contaminant even during change-out
- Multi layer pleated construction with optimized surface area
- Outer cage prevents media extrusion problem experienced with some competitive offerings
- Unique Quad Seal gasket provides maximum seal integrity
- Retrofits competitive high flow filter housings
- Thermally bonded construction
Filter Specifications
| Media: | Polypropylene |
| Inner core: | Polypropylene |
| Gaskets/O-Rings options: |
EPDM, Silicone, Buna N, Viton |
| Micron ratings: |
1, 3, 5, 10, 20, 40, 60, 100 μm |
| *Other micron rated media available upon request | |
| Dimensions and Operating Parameters | |
| Nominal lengths: |
50.8, 101.6, 152.4 cm |
| Outside diameter: |
6.0 in (15.2 cm) |
| Maximum operating temperature: | 80°C |
| Differential pressure: |
180°F@ 20psid (82°C @1.4 bar) 160°F@ 30psid (71°C @2.1 bar) 77°F @ 50psid (25°C @ 3.4 bar) |
| Recommended changeout pressure for disposal: 35 psid (2.4 bar) | |
|
Maximum flow rates: |
60” element up to 500 GPM (1892 lpm) 40” element up to 350 GPM (1325 lpm) 20” element up to 175 GPM (662 lpm) |
Filter Removal Efficiency
| Beta Ratio Efficiency | Beta 1000 99.9% | Beta 100 99% | Beta 10 90% |
| 1 micron | 1 | 0.6 | 0.2 |
| 3 micron | 3 | 2 | 1.5 |
| 5 micron | 5 | 4 | 3 |
| 10 microns | 10 | 8.5 | 6.5 |
| 20 microns | 22 | 19 | 14 |
| 40 microns | 38 | 18 | 15 |
| 60 microns | 60 | 35 | 20 |
| 100 Micron | 100 | 75 | 45 |
| Beta Ratio = |
Upstream particle counts
|
|
Downstream particle counts
|
AEGIS® TurboGuard® Pre-Filters
Its technically improved 6 inch (152 mm) high-flow filter for the utility market. Graver is the world’s largest supplier of condensate system filters and components and has been manufacturing precoat and non-precoat septa for condensate systems for more than 50 years. Graver is the consistent technology innovator with more than 40 patents and numerous technical advances for condensate and high purity water applications.
Graver’s family of TurboGuard High Flow Filters will provide superior CRUD removal upstream of deep bed demineralizers. TurboGuard High Flow Filters may also be used following ion exchange beds as a resin trap, or as highly efficient pre-filters before membrane systems.
Graver’s TurboGuard line of filters are manufactured in the USA at Graver Technologies manufacturing plants, under an ISO-9001 (2000) quality system.
Graver’s TurboGuard High Flow Filter integrates a number of improvements over currently available elements. With the most experience of any supplier in condensate applications, Graver can access more than 50 years of experience when improving fundamental filtration in condensate and high purity water applications.
Filter Specifications
Media: |
Pleated Proprietary |
Inner core: |
Multi-Layer Polypropylene |
Gaskets/O-Rings options: |
EPDM Quad Seal |
Micron ratings: |
1, 3, 5, 10, 20, 40, 60, 100 μm |
| *Other micron rated media available upon request | |
| Dimensions and Operating Parameters | |
Nominal lengths: |
20" 40" 60" |
Outside diameter: |
6” (152 mm) |
Maximum operating temperature: |
180°F (85°C) |
Differential pressure: |
180°F@ 20psid (82°C @1.4 bar) 160°F@ 30psid (71°C @2.1 bar) 77°F @ 50psid (25°C @ 3.4 bar) |
| Recommended changeout pressure for disposal: 35 psid (2.4 bar) | |
Maximum flow rates: |
60” element up to 500 GPM (1892 lpm) 40” element up to 350 GPM (1325 lpm) 20” element up to 175 GPM (662 lpm) |
Filter Removal Efficiency
| Beta Ratio Efficiency | Beta 1000 99.9% | Beta 100 99% | Beta 10 90% |
1 micron |
1 |
0.6 |
0.2 |
3 micron |
3 |
2 |
1.5 |
5 micron |
5 |
4 |
3 |
10 microns |
10 |
8.5 |
6.5 |
20 microns |
22 |
19 |
14 |
40 microns |
38 |
18 |
15 |
60 microns |
60 |
35 |
20 |
100 Micron |
100 |
75 |
45 |
| Beta Ratio = |
Upstream particle counts
|
|
Downstream particle counts
|